Skip to content
DIS Robotics
ROBOTICS · ENGINEERING · ORIGINAL SOURCES
PRE-PILOT / DEVELOPINGv0.1.0-prepilot · 2026-10-15

STARTER PLATFORM / UNVALIDATED HARDWARE

ONE CONTROL IDEA. SEPARATE ADAPTERS.

The computational controller is pure Python. Webots, Pico/Pico 2, and ESP32 interfaces are separate because desktop Python, MicroPython, and embedded C/C++ are not interchangeable runtimes.

1 / CONTROLLER CORE

Consumes measurements and state; emits bounded left/right wheel targets and next state. No simulator or GPIO imports.

2 / WEBOTS ADAPTER

Reads e-puck proximity devices, applies the control step, and sends wheel velocities through official Webots APIs.

3 / BOARD ADAPTER

Must be implemented and tested for the exact board, firmware, pins, driver, motors, sensors, power source, and stop circuit.

Human-readable source files

DOWNLOADS AND REPRODUCTION

REFERENCE STATION TARGET

Two low-voltage DC gearmotors, wheels and guarded chassis, TB6612FNG-class dual H-bridge selected against measured stall current, Pico/Pico 2 or ESP32-class controller, optional encoders, distance sensing, manual isolation, protected supply, wiring, and spares.

NO VERIFIED PRICE OR BUILD

Price cells are deliberately blank until two local supplier quotes are recorded. The illustrative $150 shared-station target excludes computers, supervision, shipping, duties, space, and replacement stock. No physical assembly or safety test has occurred in this worktree.

NATIVE SIMULATOR STATUS: BLOCKED_NATIVE_WEBOTS_RUN

Webots is not installed in the execution environment. The pure controller unit tests and deterministic scenario generator are executed separately; the `.wbt` world and Webots adapter remain implemented but unobserved until run on a supported host.